Industrial luminaire, separate light module XENRE80 142 W IP66
XENRE LED luminaire designed for particularly hot conditions, with an innovative selective glass housing. The selective glass has a very thin metal oxide coating that reflects heat radiation away but allows light to pass through. The housing can be removed if necessary.
Typical applications include steel mills and foundries where the luminaire may be exposed to very high thermal peaks for short periods of time.
In addition to the luminaire, a separately sold control unit is required, which can be placed up to 25 m away from the luminaire. One or two luminaire modules can be installed for each control module. Information on the performance values of the selected solution is available on the control unit’s product card. We offer a wide range of mounting brackets: www.i-valo.com.
Additional information
| Confirmed data | Yes |
| Warranty | 5 years |
| Calculated lifetime Ta max L80 (h) | 60000 |
Basic information
| Estimated delivery time from factory | On request |
| Installation | Surface mounting |
| Certificates | UKCA;CE |
| Recommended Products | No |
| Country of manufacture | Finland |
Dimensions
| Product width (mm) | 469 |
| Product weight (Kg) | 14.40 |
| Product height (mm) | 230 |
| Product length (mm) | 769 |
Electrical information
| Mains current (A) | 0.61 |
| Power factor | 0.96 |
| Input power (W) | 142 |
Light Source
| Colour temperature | 4000 K |
| Luminous flux (luminaire) Ta +25 °C (lm) | 17500 |
| Energy efficiency class of the light source | D |
| Lamp holder | LED module |
| Light source | LED |
| Efficacy of the luminaire Ta +25 °C (lm/W) | 123 |
| Colour rendering index | Ra >80 |
| ILCOS code | DS |
| MacAdam value | 3 SDCM |
| Efficacy of the luminaire max Ta (lm/W) | 110 |
| Luminous flux (luminaire) max Ta (lm) | 15600 |
| Number of light sources | 8 |
Structure and optics
| Light distribution | Medium wide |
| Coating thickness (μm) | 80-100 |
| Further information about connection | The luminaire module is equipped with the QPD fast connection system. A cable for connecting the luminaire module to the control module is not included in the delivery. |
| Corrosivity category of the coating | Suitable for environments classified as C5/very high corrosivity |
| Linkability | No |
| Cover material | Tempered safety glass, frosted + Selective glass |
| Body material | Polyester-coated aluminium |
| Filter | Double-effect filter with metal housing |
| Colour | Light grey |
| RAL colour | RAL 7047 |
Technical information
| IP rating | IP66 |
| IK code | IK08 |
| D-marking | No |
| Ta-class max. (°C) | +80 |
| Ta-class min. (°C) | -40 |
Compatible products
Compatible products
